|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOATCYCLE AGITATORS
Prices
Updated 11-07-11 |
|
|
|
|
|
|
|
|
|
 |
|
THE LITTLE BIG BULL # 15PP
|
|
|
|
|
|
|
|
|
|
|
|
This
size agitator was designed to fill the gap between the standard and the Big
Bull agitators. It gives much more agitation than the standard agitator and
keeps many more minnows alive and is recommended for larger vats and troughs.
The No. 15 has 1650 rpm, 2.5 amps, continuous heavy-duty grounded motor (1/15hp),
wide stout paddle and shaft for longer life, 10 1/2” x 4” basket
with a heavy-duty bearing in bottom. The No. 15 comes with a heavy-duty Plastic
Motor Plate, however, Galvanized Steel Motor Plate is available upon request.
The baskets are epoxy- coated steel and the motor has overload protection. Fully
guaranteed. Wt. 9lbs. Box of 4 = 34lbs
$195.00 EA.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AIRCYCLE JR. 10-13/10-15
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
12 Volt Motor. Fits into the top of any standard-size minnow bucket, or can
be used on 5 to 30 gallon containers to haul 500 to 1000 minnows. Fully Guaranteed.
Aircycle Jr. 10-13" Depth $140.00 ea.
Aircycle Jr. 10-15" Depth $145.00 ea.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BIG BULL AGITATOR
110V - 1/3 H.P.
$435.00 EA.
$425.00 2+
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1/3
hp. fan-cooled continuous duty, 1724 rpm. 6 amps. heavy-duty motor. Baked enamel
finish. New drip-proof cover with two giant eye holding hooks. Basket made of
4x4 heavy-gauge wire, 11-1/2" long and 6-1/2" diameter. Heavy-duty
rubber bearings at lower end shaft. Fully guaranteed. Ball-bearing motor. Shipping
weight 25 lbs. |
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#26
PP
110v - 1/20 H.P.
$172.00EA.
$168.00 2+
|
|
|
|
|
|
|
|
This is a quieter agitator
with skirt which eliminates noise. So designed to concentrate all agitation
right into the vats. 110-volt fully enclosed 1/20 hp. heavy-duty 1550 rpm.
1.5 amps. fan-cooled continuous duty motor with special factory sealed bearings.
Motor designed especially for agitators. Factory built-in 8 foot cord and
grommet. Has 5/16" brass shaft and stout paddle, 9x4 basket, extra-heavy
duty replaceable lower bearing centered by precision machinery for perfect
alignment. Ring for hanging. Large washer underside motor prevents water
entering lower bearing. One year pro rata guarantee. Thermo overload protection.
Baskets impact tested nylon.
Wt. 9 lbs. Box of 4 = 32 lbs. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#90
PP
12V - 1/20 H.P. 3000 R.P.M.
$172.00 EA.
$168.00 2+
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Many years of experience
and know how have gone into the design of this heavy-duty 12-Volt agitator
field. Fan-cooled,3000 rpm., 1/20 hp.5 amps. with spinner stop. Large splash
washer on shaft underside of motor. Stout paddle with 5/16" brass shaft.
Heavy-duty bearing insert in bottom of 4x9 basket. Band around top of basket
for reinforcement and longer life. Arrow on motor to indicate proper direction
of rotation, which is a MUST. Wt. 8 lbs. Box of 4 = 28 lbs. Factory service
life of unit is approximately 2,200 hrs. Baskets impact tested nylon. |
|
|
|
|
|
|
|
AGITATOR PARTS &
MOTORS AVAILABLE UPON REQUEST!
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Prices subject to change without notice.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|